SUBSTRATE HEATER (Max 1,000℃)
- It can be installed and used by itself in the vacuum chamber, and it reaches high temperature within a short time.
- It is okay to put a thin metal plate on top and use it as an indirect heating type.
- As a tungsten heater molded with alumina ceramic, the dimensions are 20 x 70 x 1.3t, and use two in a row for a large area.
- At a low price of KRW 20,000 per unit, terminal terminals and connecting screws are supplied free of charge along with the heater.
- ₩ 20,000 / ea
SPECIFICATION
| Withstand voltage test |
all test |
| Heat test |
all test |
| Insulation |
DC500V 100㏁ or more |
| Withstand voltage characteristics |
AC 3.75KV 5mA for 1 minute or more |
| Available in a variety of AC and DC |
※ Move left and right to check the contents.
Reference measurement table for heater temperature according to AC voltage strength
| 10V |
88°C |
10V |
88°C |
| 20V |
165°C |
70V |
463°C |
| 30V |
236°C |
80V |
532°C |
| 40V |
285°C |
90V |
595°C |
| 50V |
346°C |
100V |
632°C |
※ Move left and right to check the contents.
- Different measurement values may appear depending on the measurement method and heater.
- If the voltage supplied to the heater is too high at first, the life of the heater is shortened, so it is recommended to increase it gradually.
- Connecting AC220V to the heater may cause damage.
- Also, be careful as plasma may be generated depending on the vacuum area when the voltage is high.
- If you need a dedicated temperature controller that can change the control voltage, please contact us.
